**how do you read a 1/8" architectural scale? Yahoo Answers**

A drawing scale of 1/8”=1’-0” (or 1:96 - eight eighths per inch times 12 inches per foot) in a drawing that has inches as default drawing units means that 8 feet in the drawing are represented by 1 inch on the plotted out plan. Likewise, if a drawing has a scale of 1:200 and a drawing unit of millimeters, then 200 millimeters in the drawing will be represented by one millimeter on the... Before using an architect's scale or ruler, it is important to know the scale of the drawing or item that is being measured. Once the scale of the drawing has been ascertained, select the correct scale on the ruler. For example, 1/8 on the ruler is in fact a scale that converts 1/8 inch on the drawing to 1 foot. This would represent a drawing with a scale of 1/8" = 1 foot. Be careful when

**Setting the Print Scale Chief Architect**

For example, if the scale factor is 1:8 and the measured length is 4, multiply 4 × 8 = 32 to convert. Reducing the Scale Factor The methods above to convert a measurement assume the scale factor is in the form of 1:n or 1/n , which means some additional work is needed if the ratio is 2:3, for example.... 7/09/2013 · No thanks 1 month free. Find out why Close. Reading an Architect Scale 1/8 etrekgurl. Loading... Unsubscribe from etrekgurl? Cancel Unsubscribe. Working... Subscribe Subscribed Unsubscribe 105

**How to Use The Architect's Scale YouTube**

Architects use this material to make small-scale buildings for the architectural model of a street or a town. Nevertheless, the architectural models made by insulation boards are kind of easy to be damaged, especially the edges and corners due to the fragility of the material. how to use the lcn stock market in gta 5 Typically, a triangular scale has 12 different ratios on it - 6 on each end and related ones (like 1/4 and 1/8 for instance) interlace in opposite directions without interfering with each other. Below is what an Architectural Scale looks like.

**Reading an Architect Scale 1/8 YouTube**

Typically, a triangular scale has 12 different ratios on it - 6 on each end and related ones (like 1/4 and 1/8 for instance) interlace in opposite directions without interfering with each other. Below is what an Architectural Scale looks like. how to turn off grayscale photoshop 3 Civil Engineer’s Scale • Full Divided Scale • 1” is divided into equal decimal units of 10, 20, 30, 40, 50, 60 and 80 divisions. • For example, 1” = 100’ is a typical scale

## How long can it take?

### To Create Annotation Scales and Assign Them to Display

- To Create Annotation Scales and Assign Them to Display
- How to convert architectural scales using percentage? i
- To Create Annotation Scales and Assign Them to Display
- how do you read a 1/8" architectural scale? Yahoo Answers

## How To Use An Architectural Scale 1 8

On this ruler, the 1/8 inch equals a foot scale is on the same part of the rule as the 1/4 inch equals a foot. You just read them from different ends. See how this scale is counting in the other direction? ,40,41,42,43,44. You can just ignore the extra marks coming from the other end of the ruler.

- 7/09/2014 · How to read the architect's scale and write dimension notes in proper architectural format.
- For example, if the item is 10 feet long and you are using a 1/8 scale, the line you draw will be 10 increments, long. Draw a hash mark at the end point, the increment marked "10." Draw a straight line along the edge of the ruler connecting the two hash marks using the mechanical pencil.
- For example, 1/8 on the ruler is a scale that converts 1/8 inch to 1 foot. There are also two scales on each edge of the ruler. One scale reads left to right, while the other reads right to left. There are also two scales on each edge of the ruler.
- Typically, a triangular scale has 12 different ratios on it - 6 on each end and related ones (like 1/4 and 1/8 for instance) interlace in opposite directions without interfering with each other. Below is what an Architectural Scale looks like.